PHP 8.3.4 Released!

Funções para Array

Veja Também

Veja também is_array(), explode(), implode(), preg_split(), e unset().

Índice

  • array_change_key_case — Modifica a caixa de todas as chaves em um array
  • array_chunk — Divide um array em pedaços
  • array_column — Retorna os valores de uma coluna do array informado
  • array_combine — Cria um array usando um array para chaves e outro para valores
  • array_count_values — Conta as ocorrências de cada valor distinto em um array
  • array_diff_assoc — Computa a diferença entre arrays com checagem adicional de índice
  • array_diff_key — Computa a diferença entre arrays usando as chaves na comparação
  • array_diff_uassoc — Computa a diferença entre arrays com checagem adicional de índice que feita por uma função de callback fornecida pelo usuário
  • array_diff_ukey — Computa a diferença entre arrays usando uma função callback na comparação de chaves
  • array_diff — Computa as diferenças entre arrays
  • array_fill_keys — Preenche um array com valores, especificando chaves
  • array_fill — Preenche um array com valores
  • array_filter — Filtra elementos de um array utilizando uma função callback
  • array_flip — Permuta todas as chaves e seus valores associados em um array
  • array_intersect_assoc — Computa a interseção de arrays com uma adicional verificação de índice
  • array_intersect_key — Calcula a interseção de arrays, comparando pelas chaves
  • array_intersect_uassoc — Computa a interseção de arrays com checagem de índice adicional, compara índices por uma função de callback
  • array_intersect_ukey — Computa a interseção de arrays usando uma função de callback nas chaves para comparação
  • array_intersect — Calcula a interseção entre arrays
  • array_is_list — Verifica se um array é uma lista
  • array_key_exists — Verifica se uma chave ou índice existe em um array
  • array_key_first — Obtém a primeira chave de um array
  • array_key_last — Obtém a última chave de um array
  • array_keys — Retorna todas as chaves ou uma parte das chaves de um array
  • array_map — Aplica uma função em todos os elementos dos arrays dados
  • array_merge_recursive — Mescla um ou mais arrays recursivamente
  • array_merge — Combina um ou mais arrays
  • array_multisort — Ordena múltiplos arrays ou arrays multidimensionais
  • array_pad — Expande um array para um certo comprimento utilizando um determinado valor
  • array_pop — Extrai um elemento do final do array
  • array_product — Calcula o produto dos valores de um array
  • array_push — Adiciona um ou mais elementos no final de um array
  • array_rand — Escolhe uma ou mais chaves aleatórias de um array
  • array_reduce — Reduz um array para um único valor através de um processo iterativo via callback
  • array_replace_recursive — Substitui elementos de arrays passado no primeiro array recursivamente
  • array_replace — Substitui elementos de arrays passados no primeiro array
  • array_reverse — Retorna um array com os elementos na ordem inversa
  • array_search — Procura por um valor em um array e retorna sua chave correspondente caso seja encontrado
  • array_shift — Retira o primeiro elemento de um array
  • array_slice — Extrai uma parcela de um array
  • array_splice — Remove uma parte array e a substitui por outra coisa
  • array_sum — Calcula a soma dos elementos de um array
  • array_udiff_assoc — Computa a diferença entre arrays com checagem adicional de índice, compara dados por uma função de callback
  • array_udiff_uassoc — Computa a diferença entre arrays com checagem adicional de índice, compara dados e índices por uma função de callback
  • array_udiff — Computa a diferença de arrays usando uma função de callback para comparação dos dados
  • array_uintersect_assoc — Computa a interseção de arrays com checagem adicional de índice, compara os dados utilizando uma função de callback
  • array_uintersect_uassoc — Computa a interseção de arrays com checagem adicional de índice, compara os dados e os índices utilizando funções de callback separadas
  • array_uintersect — Computa a interseção de array, comparando dados com uma função callback
  • array_unique — Remove os valores duplicados de um array
  • array_unshift — Adiciona um ou mais elementos no início de um array
  • array_values — Retorna todos os valores de um array
  • array_walk_recursive — Aplica um função do usuário recursivamente para cada membro de um array
  • array_walk — Aplica uma determinada função em cada elemento de um array
  • array — Cria um array
  • arsort — Ordena um array em ordem descrescente e mantém a associação de índices
  • asort — Ordena um array em ordem crescente e mantém a associação de índices
  • compact — Cria um array contendo variáveis e seus valores
  • count — Conta todos os elementos de um array ou de um objeto Countable
  • current — Retorna o elemento atual em um array
  • each — Retorna o par atual de chave e valor de um array e avança o seu cursor
  • end — Define o ponteiro interno de um array para seu último elemento
  • extract — Importa variáveis para a tabela de símbolos a partir de um array
  • in_array — Checa se um valor existe em um array
  • key_exists — Sinônimo de array_key_exists
  • key — Retorna uma chave de um array
  • krsort — Ordena um array pelas chaves em ordem descrescente
  • ksort — Ordena um array pelas chaves em ordem crescente
  • list — Cria variáveis como se fossem arrays
  • natcasesort — Ordena um array utilizando o algoritmo da "ordem natural" sem diferenciar maiúsculas e minúsculas
  • natsort — Ordena um array utilizando o algoritmo de "ordem natural"
  • next — Avança o ponteiro interno de um array
  • pos — Sinônimo de current
  • prev — Retrocede o ponteiro interno de um array
  • range — Cria um array contendo uma faixa de elementos
  • reset — Faz o ponteiro interno de um array apontar para o seu primeiro elemento
  • rsort — Ordena um array em ordem descrescente
  • shuffle — Embaralha um array
  • sizeof — Sinônimo de count
  • sort — Ordena um array em ordem ascendente
  • uasort — Ordena um array com uma função de comparação definida pelo usuário e mantém associações de índices
  • uksort — Ordena um array pelas chaves utilizando uma função de comparação definida pelo usuário.
  • usort — Ordena um array pelos valores utilizando uma função de comparação definida pelo usuário
add a note

User Contributed Notes 13 notes

up
18
permanovd at gmail dot com
5 years ago
A simple trick that can help you to guess what diff/intersect or sort function does by name.

[suffix] assoc - additional index check. Compares both value and index.

Example: array_diff_assoc, array_intersect_assoc.

[suffix] key - index only check. Ignores value of array, compares only indexes.

Example: array_diff_key, array_intersect_key.

[suffix] **empty** - no "key" or "assoc" word in suffix. Compares values only. Ignores indexes of array.

Example: array_diff, array_intersect.

[prefix] u - will do comparison with user defined function. Letter u can be used twice in some functions (like array_udiff_uassoc), this means that you have to use 2 functions (one for value, one for index).

Example: array_udiff_uassoc, array_uintersect_assoc.

This also works with array sort functions:

[prefix] a - associative. Will preserve keys.

Example: arsort, asort.

[prefix] k - key sort. Will sort array by keys.

Example: uksort, ksort.

[prefix] r - reverse. Will sort array in reverse order.

Example: rsort, krsort.

[prefix] u - sort by user defined function (same as for diff/intersect).

Example: usort, uasort.
up
2
renatonascto at gmail dot com
15 years ago
Big arrays use a lot of memory possibly resulting in memory limit errors. You can reduce memory usage on your script by destroying them as soon as you´re done with them. I was able to get over a few megabytes of memory by simply destroying some variables I didn´t use anymore.
You can view the memory usage/gain by using the funcion memory_get_usage(). Hope this helps!
up
-3
indioeuropeo at driverop dot com
4 years ago
I need to take an element from the Array and change its position within the Array by moving the rest of the elements as required.
This is the function that does it. The first parameter is the working Array. The second is the position of the element to move and the third is the position where to move the element.
The function returns the modified Array.
<?php
function array_move_elem($array, $from, $to) {
if (
$from == $to) { return $array; }
$c = count($array);
if ((
$c > $from) and ($c > $to)) {
if (
$from < $to) {
$f = $array[$from];
for (
$i = $from; $i < $to; $i++) {
$array[$i] = $array[$i+1];
}
$array[$to] = $f;
} else {
$f = $array[$from];
for (
$i = $from; $i > $to; $i--) {
$array[$i] = $array[$i-1];
}
$array[$to] = $f;
}

}
return
$array;
}

?>
Examples:
<?php
$array
= array('Cero','Uno','Dos','Tres','Cuatro','Cinco','Seis','Siete','Ocho','Nueve','Diez');
$array = array_move_elem($array, 3, 5); // Move element in position 3 to position 5...
print_r($array);

$array = array_move_elem($array, 5, 3); // Move element in position 5 to position 3, leaving array as it was... ;)
print_r($array);

?>
Return:
<?php
Array ( [0] => Cero [1] => Uno [2] => Dos [3] => Cuatro [4] => Cinco [5] => Tres [6] => Seis [7] => Siete [8] => Ocho [9] => Nueve [10] => Diez )
Array ( [
0] => Cero [1] => Uno [2] => Dos [3] => Tres [4] => Cuatro [5] => Cinco [6] => Seis [7] => Siete [8] => Ocho [9] => Nueve [10] => Diez )
?>
up
-13
nicoolasens at gmail dot com
8 years ago
/*to change an index without rewriting the whole table and leave at the same place.
*/
<?php
function change_index(&$tableau, $old_key, $new_key) {
$changed = FALSE;
$temp = 0;
foreach (
$tableau as $key => $value) {
switch (
$changed) {
case
FALSE :
//creates the new key and deletes the old
if ($key == $old_key) {
$tableau[$new_key] = $tableau[$old_key];
unset(
$tableau[$old_key]);
$changed = TRUE;
}
break;

case
TRUE :
//moves following keys
if ($key != $new_key){
$temp= $tableau[$key];
unset(
$tableau[$key]);
$tableau[$key] = $temp;
break;
}
else {
$changed = FALSE;} //stop
}
}
array_values($tableau); //free_memory
}

//Result :
$tableau = array(1, 2 , 3, 4,5, 6, 7, 8, 9, 10);
$res = print_r($tableau, TRUE);
$longueur = strlen($res) -1;
echo
"Old array :\n" . substr($res, 8, $longueur) . "\n" ;

change_index ($tableau, 2, 'number 2');
$res = print_r($tableau, TRUE);
$longueur = strlen($res) -10;
echo
"New array :\n" . substr($res, 8, $longueur) . "\n" ;

/*
Old array :
[0] => 1
[1] => 2
[2] => 3
[3] => 4
[4] => 5
[5] => 6
[6] => 7
[7] => 8
[8] => 9
[9] => 10
)

New array :
[0] => 1
[1] => 2
[numéro 2] => 3
[3] => 4
[4] => 5
[5] => 6
[6] => 7
[7] => 8
[8] => 9
[9] => 10
*/
?>
up
-15
info at hotkey404 dot com
3 years ago
Updated code of 'indioeuropeo' with option to input string-based keys.

INPUT:
array(4) {
["a"]=>
string(5) "Apple"
["b"]=>
string(6) "Banana"
["c"]=>
string(3) "Cat"
["d"]=>
string(3) "Dog"
}

OUTPUT:
array(4) {
["a"]=>
string(5) "Apple"
["d"]=>
string(3) "Dog"
["b"]=>
string(6) "Banana"
["c"]=>
string(3) "Cat"
}

FUNCTION:
<?php
function array_move_elem($array, $from, $to){
// return if non-numeric couldn't be found or from=to
if(!is_numeric($from)){
if(
array_search($from, array_keys($array))!==FALSE){
$from = array_search($from, array_keys($array));
}else{
return
$array;
}
}
$array_numeric_keys = array();
foreach(
$array as $k => $v){
$array_numeric_keys[] = $k;
}
if (
$from == $to) { return $array; }
$c = count($array_numeric_keys);
if ((
$c > $from) and ($c > $to)) {
if (
$from < $to) {
$f = $array_numeric_keys[$from];
for (
$i = $from; $i < $to; $i++) {
$array_numeric_keys[$i] = $array_numeric_keys[$i+1];
}
$array_numeric_keys[$to] = $f;
} else {
$f = $array_numeric_keys[$from];
for (
$i = $from; $i > $to; $i--) {
$array_numeric_keys[$i] = $array_numeric_keys[$i-1];
}
$array_numeric_keys[$to] = $f;
}

}
$array_new = array();
foreach(
$array_numeric_keys as $v){
$array_new[$v] = $array[$v];
}
return
$array_new;
}
?>
up
-20
ob at babcom dot biz
17 years ago
Here is a function to find out the maximum depth of a multidimensional array.

<?php
// return depth of given array
// if Array is a string ArrayDepth() will return 0
// usage: int ArrayDepth(array Array)

function ArrayDepth($Array,$DepthCount=-1,$DepthArray=array()) {
$DepthCount++;
if (
is_array($Array))
foreach (
$Array as $Key => $Value)
$DepthArray[]=ArrayDepth($Value,$DepthCount);
else
return
$DepthCount;
foreach(
$DepthArray as $Value)
$Depth=$Value>$Depth?$Value:$Depth;
return
$Depth;
}
?>
up
-27
kolkabes at googlemail dot com
11 years ago
Short function for making a recursive array copy while cloning objects on the way.

<?php
function arrayCopy( array $array ) {
$result = array();
foreach(
$array as $key => $val ) {
if(
is_array( $val ) ) {
$result[$key] = arrayCopy( $val );
} elseif (
is_object( $val ) ) {
$result[$key] = clone $val;
} else {
$result[$key] = $val;
}
}
return
$result;
}
?>
up
-15
DamianKaelGreen at gmail dot com
6 years ago
While there are a lot of array functions in the PHP libs, there also seem to be a lot of rudimentary ones missing.

I went ahead and created several of my own functions for handling multiple non-associative (na) arrays including:

na_array_merge
na_array_intersect
na_array_diff
na_array_xnor
na_array_xor

If you are using Venn diagrams to think about your arrays, then these functions might be for you.

I have made them available and posted documentation for them here: https://www.greendingle.com/some-useful-non-associative-array-functions/
up
-26
dave at davidhbrown dot us
12 years ago
While PHP has well over three-score array functions, array_rotate is strangely missing as of PHP 5.3. Searching online offered several solutions, but the ones I found have defects such as inefficiently looping through the array or ignoring keys.

The following array_rotate() function uses array_merge and array_shift to reliably rotate an array forwards or backwards, preserving keys. If you know you can trust your $array to be an array and $shift to be between 0 and the length of your array, you can skip the function definition and use just the return expression in your code.

<?php
function array_rotate($array, $shift) {
if(!
is_array($array) || !is_numeric($shift)) {
if(!
is_array($array)) error_log(__FUNCTION__.' expects first argument to be array; '.gettype($array).' received.');
if(!
is_numeric($shift)) error_log(__FUNCTION__.' expects second argument to be numeric; '.gettype($shift)." `$shift` received.");
return
$array;
}
$shift %= count($array); //we won't try to shift more than one array length
if($shift < 0) $shift += count($array);//handle negative shifts as positive
return array_merge(array_slice($array, $shift, NULL, true), array_slice($array, 0, $shift, true));
}
?>
A few simple tests:
<?php
$array
=array("foo"=>1,"bar"=>2,"baz"=>3,4,5);

print_r(array_rotate($array, 2));
print_r(array_rotate($array, -2));
print_r(array_rotate($array, count($array)));
print_r(array_rotate($array, "4"));
print_r(array_rotate($array, -9));
?>
up
-24
Ewan
7 years ago
I was looking for an array aggregation function here and ended up writing this one.

Note: This implementation assumes that none of the fields you're aggregating on contain The '@' symbol.

<?php
function array_group_by($flds, $arr) {
$groups = array();
foreach (
$arr as $rec) {
$keys = array_map(function($f) use($rec) { return $rec[$f]; }, $flds);
$k = implode('@', $keys);
if (isset(
$groups[$k])) {
$groups[$k][] = $rec;
} else {
$groups[$k] = array($rec);
}
}
return
$groups;
}

?>
up
-26
oliverSPAMMENOT at e-geek dot com dot au
13 years ago
Function to pretty print arrays and objects. Detects object recursion and allows setting a maximum depth. Based on arraytostring and u_print_r from the print_r function notes. Should be called like so:

<?php
egvaluetostring
($value) //no max depth, or
egvaluetostring($value, $max_depth) //max depth set

function egvaluetostring($value, $max_depth, $key = NULL, $depth = 0, $refChain = array()) {
if(
$depth > 0)
$tab = str_repeat("\t", $depth);
$text .= $tab . ($key !== NULL ? $key . " => " : "");

if (
is_array($value) || is_object($value)) {
$recursion = FALSE;
if (
is_object($value)) {
foreach (
$refChain as $refVal) {
if (
$refVal === $value) {
$recursion = TRUE;
break;
}
}
array_push($refChain, $value);
}

$text .= (is_array($value) ? "array" : "object") . " ( ";

if (
$recursion) {
$text .= "*RECURSION* ";
}
elseif (isset(
$max_depth) && $depth >= $max_depth) {
$text .= "*MAX DEPTH REACHED* ";
}
else {
if (!empty(
$value)) {
$text .= "\n";
foreach (
$value as $child_key => $child_value) {
$text .= egvaluetostring($child_value, $max_depth, (is_array($value) ? "[" : "") . $child_key . (is_array($value) ? "]" : ""), $depth+1, $refChain) . ",\n";
}
$text .= "\n" . $tab;
}
}

$text .= ")";

if (
is_object($value)) {
array_pop($refChain);
}
}
else {
$text .= "$value";
}

return
$text;
}
?>
up
-27
mo dot longman at gmail dot com
16 years ago
to 2g4wx3:
i think better way for this is using JSON, if you have such module in your PHP. See json.org.

to convert JS array to JSON string: arr.toJSONString();
to convert JSON string to PHP array: json_decode($jsonString);

You can also stringify objects, numbers, etc.
up
-28
cyberchrist at futura dot net
16 years ago
Lately, dealing with databases, I've been finding myself needing to know if one array, $a, is a proper subset of $b.

Mathematically, this is asking (in set theory) [excuse the use of u and n instead of proper Unicode):

( A u B ) n ( ~ B )

What this does is it first limits to known values, then looks for anything outside of B but in the union of A and B (which would be those things in A which are not also in B).

If any value exists in this set, then A is NOT a proper subset of B, because a value exists in A but not in B. For A to be a proper subset, all values in A must be in B.

I'm sure this could easily be done any number of ways but this seems to work for me. It's not got a lot of error detection such as sterilizing inputs or checking input types.

// bool array_subset( array, array )
// Returns true if $a is a proper subset of $b, returns false otherwise.

function array_subset( $a, $b )
{
if( count( array_diff( array_merge($a,$b), $b)) == 0 )
return true;
else
return false;
}
To Top